Step two: Windows ME

1. Now that you have created the connectoid for OmniTel Communications, right-click OmniTel Communications and choose Properties...

2. Uncheck Use area code and Dialing Properties. Then click on the Networking tab...

3. Uncheck all boxes except Enable software compression and TCP/IP. Once you get that done - click the TCP/IP Settings button...

4.Put a dot next to Specify name server addresses. Then fill out the Primary DNS and Secondary DNS as you see here. Type the numbers 167.142.225.3 in for the Primary DNS and 167.142.225.5 for the Secondary DNS...

5. Click OK and OK again to get out of the connectoid Properties windows. Close Dial-Up Networking. You're done!!!